450 Rigby Part 6

Closing comments by LB the owner of this 450 Rigby:

I’m on the sticks all ready to shoot an old dugga boy when he finally stands up.  Assuming, of course, a good shot presents itself.  Two good bulls are bedded down in the thick Zambezi  Valley jesse about 30 yards in front of me.  I can see one, but the brush hides the other from my view.  Rob, my PH suggests I get on the other bull, but it’s too risky a move so I stay with the bull I’m on.  We’ve been on their tracks for over 4 hours since early morning but lost them about 30 minutes ago.  Rob was about to call the whole thing off when we heard the faint whistle from the lead tracker – the track has been found and we’re close.  A few yards further into the jesse, the bull is spotted, the sticks are up and I’m in position.  Now we wait...

So far, I’ve taken three good cape buffalo bulls with the Echols Classic M98 450 Rigby; one in Tanzania in 2022 and two more here in Mozambique 2024.  Each has been stung hard by the 450 gr. TSX at 2350 fps prompting the PH’s to say things like, “That 450 nocks the socks off him.” and “That 450 really barks hey.”  I will say so myself as well, it does hit with authority – no doubt about it.  Obviously, the 450 Rigby case supports more powerful performance, but for controllability, shootability and with cape buffalo as the primary quarry, these loads are fine.  To put things in perspective, my handloads for buffalo are about the same power level as a 450 Lott.  

The bark of the mighty 450 Rigby has been so effective, that up until now, I haven’t had the need or the opportunity to see how well the whole package performs when things get interesting, which is, as we all know by now, what this gun is built for.  This is about to change...

But before I get to that, some more of the back story.  In addition to the normal range work, I have done a fair amount of practice with the rifle to get familiar with its personality.  In March of 2024 I visited Tim Fallon’s FTW Ranch in Barksdale TX for a few days to participate in their excellent SAAM Safari Course.  The rifle performed great, shooting and handling exactly as I had hoped.  The stock fit proved to be just about perfect.  Mounting the gun to my shoulder, no head position adjustments are necessary to center the white front bead in the ghost ring.  At 65 years old I wear progressive lens glasses while shooting the ghost ring set up, so I only need to focus on the front bead and the target.  No mid sight v-notch to worry about.  Speaking of the front bead, I set the gun up to shoot to the center of the bead at 75 yards.  Some folks like a 6 o’clock hold.  Not me.  I want to put the bead right where I want the bullet to land.  The gun swings great on movers.  I’m not even aware of the ghost ring and I love the open-space awareness (that is, the opposite of looking through a scope) when engaging the target.

Recoil, though stout is manageable.  The gun is controllable too.  For shooting big bores off African style shooting sticks, I like to wear a glove on my support hand and then place my support hand in the crotch of the shooting sticks with a firm grip on the fore end.  I imagine this approach isn’t for everyone, but it works great for me.  It gives me much better control of the gun during recoil allowing a much better follow through, efficient bolt operation and quick target re-acquisition.  During alpha testing (engineering development term) of the M98 I had problems holding on to the pistol grip during recoil.  D’Arcy, when he wasn’t taking pictures of this, assured me the problem would go away once the stock was checkered.  He was right.   By the end of the Safari Prep course (really a beta test of sorts), my confidence with this gun is sky high.  I’m ready for the field.  However, one little issue did crop up during the course and I’m glad it did.

Tim recommends Safari Prep students bring some low power loads to save their shoulders from the cumulative effects of recoil over the three-day course.  I didn’t have time to develop practice ammo, so I brought 50 rounds of full power loads to the course.  The recoil took its toll, after 2 days of shooting the 450 Rigby my left shoulder was wore out.  I simply couldn’t take it anymore.  However, I’m glad I used all full power loads during the course.  Here’s why.

You do a lot of field simulation drills at the SAAM Safari course. Over the span of a day and half I seldom emptied the entire magazine over the courses of fire.  To get ready for the next drill I’d simply top off with more cartridges from my belt and carry on.  All good.  No problems, that is until the charging elephant simulation. 

The drill is to shoot two stationary life size elephant targets, then engage a third, but charging bull.  First two shots are good, but the third round would not chamber.  With the charging bull rapidly approaching I had to eject the problem round, single load the rifle and kill the cardboard ele before being run over.  While my “PH” is screaming “Oh no, you’re gonna die!  Ahhh!” in my ear, the chief instructor is filming the whole event on his iPhone.  Here it is with Tim’s permission.

So, what happened?  Was there a problem with my ammo?  Or was there a problem the rifle?

I knew, or thought the ammo was good, because I double check everything, even three times before going on a field trip – training, and especially hunting.  At my loading bench I had noticed some finished rounds would bind a bit if ejected after being chambered.  I’ll test/verify each round chambers and ejects (firing pin removed) before going on a hunt.  With this rifle I had noticed if there was sufficient bullet run out extraction became difficult.  Smudge marks on the bullet showed exactly what was going on.  I made some changes in my reloading process to correct this little problem and sorted all the ammo before the class.I knew this wasn’t it.  Something else was going on.

Close inspection of the guilty round showed a slight bulge in the case neck just below the crimp.  Turns out, the round had been in the bottom of the magazine box through several exercises.  As a result of the recoil the bullet slammed into the front of the magazine box and compressed the bullet into the neck enough to bulge the neck to prevent chambering.

This problem is nothing new with magazine fed big bore rifles.  I don’t think there is a solution, other than to be careful to inspect all, not just your newly loaded, of your ammo before going on a hunt to make sure it chambers.  I did test to make sure the final (first down, last out) round in a full magazine would chamber and fire properly when I got home.  Everything worked fine.  My guess is that the problem round at FTW had been in the bottom of the magazine for several shooting sessions.  Lesson learned.  Glad I brought and used full power loads in the class. 

This little episode does bring up a few important “features/liabilities” of the M98 action, and control round feed actions in general.  First, I’ve always valued a CRF action’s ability to reliably eject a loaded round is an even bigger asset than the famed claw extractor on such actions.  Of course this is a highly debatable topic.  Nevertheless, I’m of the opinion the importance of blade ejectors (not “mechanical” – the misnomer to differentiate them from spring ejectors, which are also “mechanical” is a personal pet peeve of mine) is too often overlooked.  As the video shows, even though the deformed round wasn’t fully chambered it was ejected quickly.  Good!  Second, the single loaded round chambered into the action without inserting cartridge into the magazine box.  Very Good!!  I believe some, maybe many, M98 actions require cartridges be fed from the magazine box.  I much prefer a rifle action to be able to do both.  Reliably, 100% of the time.  I wouldn’t have had time for the third shot in the video if D’Arcy’s M98 had to be fed from the magazine box.  High marks to the Echols Classic M98 450 Rigby in this simulated field test. 

I highly recommend Tim Fallon’s SAAM Safari Preparation course at FTW Ranch in Barksdale Texas.  https://ftwsaam.com.   

D’Arcy provides a Delrin insert on the ghost ring for load development and sighting in.  It works great.  Keep it installed for precise work such as sighting in, load development or verifying zero in country, then remove it for hunting.  D’Arcy says they get lost often.  I still have mine.  So far...

The Echols Classic 450 Rigby holds 3 down and 1 up.  It’s been on three safaris so far.  Interestingly, each of my PH’s recommended I hunt with a round in the chamber.  This makes sense in dangerous game country, but I never do so anywhere else for safety reasons.  It’s my understanding this approach is NOT universal in Africa.  And I am making no recommendation one way or the other.  I bring this up because it would be nice for the rifle to hold 4 down in the magazine box.  But when you can hunt with 3 down and 1 up it’s not that much different.  In my 3 safaris, which isn’t much at all, a 3 round magazine box limitation has not been an issue.  D’Arcy could have made the gun with a coffin floorplate to support 4 down.  But it would ruin the look of the rifle.  I’m fine with the magazine capacity at 3.

The rifle weighs 11.25 pounds with 4 rounds of 450 gr ammo and a Latigo sling.  It’s not too heavy to carry all day long.  It’s comfortable to shoot.  And as I’ve already mentioned, the stock fits perfectly, which is a key factor to making this whole project “work”.

Now the question is, would I change anything on this rifle?  The stock fits.  It’s accurate.  It handles like a dream.  I love the “awareness” of the ghost ring in the field.  It looks terrific.  The lines, the wood, the minor adornments are classic.  At first glance it’s nothing over-the-top, but for someone who knows dangerous game rifles, it’s special.  A ‘subtle flex’ my kids would say.  Sure, it only holds 3 down, but this isn’t a big issue for me.  The only item I can think to change is maybe have a red, rather than a black recoil pad.   Another half a pound heavier to tame the recoil just a bit more would be good too come to think of it.  D’Arcy may have built me the perfect dangerous game “stopping” rifle.  Or so says this west coast dreamer wannabe PH with only a few buffalo under his belt.  

Thinking about that a bit more...  In a perfect world I would change the chambering from 450 Rigby to 460 G&A because the 460 G&A offers essentially the same performance but in the more compact 404 Jeffery platform, which would be more portable and allow 4 down in the magazine box.  But even the 460 G&A isn’t perfect, the shoulder angle is too shallow.  

In his book, African Dangerous Game Cartridges, Pierre van der Walt puts it this way, “In .458” calibre there are four hot babes with which I will cheat on my wife anytime of the day.  The 450 Rigby Rimless Magnum and the .460 Weatherby Magnum, the near-perfect .460 G&A and my own shortened, slightly modified .458 African derivative, designed for its compactness.”

After just a few trips to Africa, taking 4 cape buffalo and a few American bison, I’m inclined to agree with Mr. van der Walt; the 460 G&A, or better yet a 460 G&A Improved (call it the 458 Echols?) would be just about the perfect .458” big bore if properly head-stamped brass was readily available.  It’s not of course.  So short of that, my vote goes to the 450 Rigby.

That said, if D’Arcy and I were 25 years younger I might just order another FZH M98 action, source a nice stick of French walnut, order a .458 Krieger barrel, purchase a 460 G&A (I) reamer and somehow bribe D’Arcy to go to town.  With a red recoil pad of course.  All things considered; the 450 Rigby is one of the best options available today.  I’m thrilled with the outcome of this project.

Or, to put it another way.  I recently shot my 450 NE Verney Carron double at the range and 2was quickly reminded how different it is from the M98.  I’m a bolt action guy.  Definitely.  With a few safaris with the Echols Classic now under my belt, I sold the VC.  I won’t miss it a bit.  

...now, back to the story.  Buffalo #4 took the first shot through the heart then turned and ran away, but in our direction.  Not a charge, but a close pass by of about 15 – 20 yards.  Rather than write about it, see for yourself in this short promo video for D’Arcy Echols and Co.  As you can see, the shot window was short and quick.  The second shot went in on the point of the shoulder and the bull keeled over a few short yards away.

Nicely done and thank you Mr. Echols.

Video currently under construction

Recovered Bullets From Buffalo #4

Bullet on the left first shot (450 gr., 100% weight retention)

Bullet on the right second shot (334 gr. 74% weight retention)