Sunday, May 14, 2017

Four For Four


When Lexi and I reached the truck there was a scramble for the remaining water bottles, still cold they went a long way to re-hydrating this pair of dry turkey hunters. That morning found us walking and calling through familiar territory. A fresh skiff of snow lay at our feet and a cold wind falling off the snow covered peaks above reminded us of similar opening weekends in the past.

This year however was different. As we walked from one glassing knob to the next, calling in between, we never heard a reply or saw a bird. As the leaves had yet to fully break out and with a blanket of new snow spotting a flock of turkeys should have been as easy as opening a door. The absence of any tracks or droppings, usually so profuse over the years that we hardly ever stopped to notice unless the track was large and fresh giving us a clue as to what potential mature gobbler may be that area.

Two miles from the truck we stood at the edge of the historical breeding center for that group of ridges and valleys and so far the place was as quiet as library. My daughter took the lead and we dropped into a sheltered valley that held a small meadow not to far from a roost site that is the hub of activity in that part of the ranch. If there is no sigh there, then what ?


Sure enough at the edge of the maples we find tracks from what appears to be three hens and one big footed gobbler from the night before as they headed to roost. Lexi picks a familiar path up an old two track the leads us higher up the mountain. Every now and then I send a string of yelps into the forest around us, there are no replies. In previous years we'd be hearing gobblers and hens all around us at this point on the ridge line but this morning the lack of any tracks in the road leads me to believe the long, cold protracted winter has taken its toll on the bird population. Birds on this property usually winter 3 miles from here in a flock of one to two hundred strong. I fear there are lot of breast bones to be found lying in the new spring grass. 


We do our usual loop, glassing and calling as we go higher up the mountain. We flush three mature hens on the walk and finally reach the Frog Pond and find it free of ice despite the cold spell. Lexi spots one of the ponds name sakes and lifts it from the shallows. In a frozen stupor the frog shows no reaction other than to press itself closer into her palm that is no doubt radiating a radically different body temperature.


We skirt the pond and soon come upon fresh turkey tracks from two hens heading north. With the property line only 150 yards away I give a half baked series of yelps to see if the birds are still in the area hidden in a stand of aspens. As the last yelp fades we are answered with a single gobble from what sounds like a mature bird and very close. We quickly find cover, set up the deeks and I begin to call. In retrospect we should have just sat down and called and forgot the deeks. The bird never answered us again. We stick it out for 45 minutes hoping that the bird might be coming in silent but any gobbler moving towards us would have been easily seen against the new snow. We finally picked up and worked our was around that patch of aspens to see if we could locate him from another ridge and then make a plan. The noon sun felt good as we glassed the area and badgered some crumpled sandwiches. With no bird in sight we back tracked then headed over to where the bird should have been. I gave a couple soft yelps and we received a muffled reply from far down the valley, this bird is traveling. With tracks to follow we finally topped a small ridge and I spot the gobbler loafing in the sun picking at some new grass shoots all by himself across the draw.

We drop into an aspen thicket out of sight and creep within a 150 yards of where he should be, set up and called for quite some time. Changing up the calls I broke out a 50 year old Lynch box call, an equally old cedar push pin and an old slate and peg. All have different tones and tonal change can make a difference at times. Over the next hour I softly call in the cadence of what I think sounds like a lonely hen, the gobbler unimpressed remains silent.

Has he gapped it again ? We finally picked up and slowly walk into a flooded meadow that offers a view of where the bird had last been feeding. I spot the long beards big bronze backside hot footing up the hill away from us clearly spooked. On the long walk back to the truck we spot two more sets of hen tracks in the rapidly melting snow. It's been a good day, we found a frog-sickle and enjoyed the exercise, often that's all you can expect. 

Lexi had to Life Guard the next afternoon until 3:30, when done she changed into her greens and we lined out for the woods. The plan this afternoon was to hunt near the roost where we found the gobbler tracks the day before. This plan is a long shot and has never worked in the past but its the last day of the youth season and we're limited on daylight. We roll the dice and start boiling up the valley floor. When we're 400 yards from our destination I hear a faint gobble across a swollen stream above us and to our left. Instead of trying to set up on this bird we continue up the valley and break into a tiny meadow at the base of three ridge fingers. As we enter the meadow another bird, this time a hen begins an alarm putt to our left and across the stream. She is concerned but doesn't bust out and flush.


Once in the meadow we bank hard right, slip up the hillside and onto another connecting two track. It is here we stop and I look for a suitable location to build a quick blind. In years past I have called in and killed two gobblers in the meadow below right at the crack of dawn but any evening attempts to date have always resulted in seeing birds but never closing the deal as you never know what direction the birds will come from. The roost is located another 175 to 200 yards steeply uphill behind us and out of sight. However over the years I have noticed that any birds across the creek will often come down one of the finger ridges dropping into the meadow will sometimes feed, loiter and display in the meadow until just before sunset and then as if pulled by a tractor beam walk swiftly uphill towards the roost site. The route taken to fly up is determined by the individual bird or birds. In short, its a crap shoot as to where you park your bottom. This afternoon I elect to set up just inside the edge of the trees slightly above the meadow and well downhill from the roost. Crowd the roost and scare the birds and you can kiss that spot goodbye for the rest of the spring. 

I pick a spot in a tangle of fallen limbs and drop our gear into the center of the nest. I walk forward to set up three Avian-X decoys, two hens and one Jake 25 steps ahead of us. Lexi clears out litter from the hide and drapes some lightweight camo netting on the front and sides of the limbs to further break up out outline. She pulls up face mask, slips on her gloves then settles in for the rest of the evening. I look over the set up one last time slip in the back of the hide and take my seat slightly behind and to her left. 

For the next hour we sit in silence. I then pick up a call and send a few soft yelps into the trees with my old Lynch box and see my daughters head slowly swivel to the right. Without any doubt she hears a reply while my 60 year old ears have detected exactly zero. For ten long minutes she never moves then slowly turns back to look at me. "Hear one ?" I whisper, she rolls her eyes, nods and just then I see a mature hen enter the meadow below us from our right. The hens feeds and softly yelps ever so often and I reply in kind as it begins to lightly rain.

Soon the hen has had her fill and walks back out of the meadow and vanishes. I then catch the glimpse of two younger gobblers entering the meadow from our left. Maybe one of these birds I heard on the walk up the two track earlier in the afternoon. The toms peck and scratch in the new grass and are soon joined by another pair of mature hens. Lexi is now on high alert, shifts her sitting position slowly and raises the butt stock off her thigh for a little more maneuverability. The rain stops the same time the boss gobbler arrives. He enters the meadow from our right coming off the end of one of the small finger ridges. 

He struts into the meadow and both the younger gobblers evaporate. No doubt this big tom has been kicking butt in the team ranks lately. The hens pay him little attention and all three birds begin to feed in our direction still well out of range. The long beard gobbles faintly twice more as he feeds in our direction. Lexi's barrel is now tracking the birds every step. The two hens slip into a draw out of sight and if the gobbler follows their path Lexi will never get a shot. I purr just a couple of notes and the tom raises his head looks in our direction and veers ever so slightly towards us. The sound of the safety going off sounds like a cymbal clash to me but the gobbler keeps feeding uphill in our direction. 

I think of all the afternoons that I have sat in this very spot only to have the birds slip around me just out of range time after time it's hard to believe we now have one almost in our laps. Then the bird notices my Jake decoy for the first time and its all but over. He drops into a display stance and drags his wings over the bank and into the two track. The bird is now well within range, almost to close really, I'm beginning to count backwards with anxiety as my daughter calmly aims down the rib waiting for a clear shot so as not to ventilate my decoy spread. The tom steps to the left to come at the fake Jake from another angle.

The bird never hears the shot, never flaps a wing, never kicks a drumstick, he simply folds up graveyard dead before he even hits the ground. A few neck feather drift on the breeze severed by the Heavy 7's. Lexi stands up for the first time in hours and walks over to the fallen gobbler. I sit in the blind for a while just to watch this kid of mine. The gobbler is as big as one can expect from our area, I myself have killed some as large but I've never shot a bigger one. Mature in every respect with a broken up burly beard and rounded over spurs he is packing around some serious heft. I muse that he should be as tender as Carbon-14 and my daughter laughs out loud but knows you thankfully take what you are given with appreciation whenever it's offered. Lexi is all smiles as she tags the tom and we recount the last half hour as we slowly pick up our kit for the long walk out. 



Soon we're walking down the valley as the sun begins to set behind us. We stop ever so often just to listen in the settling gloom. The words are few as we slip further down the valley, the bond between us woven just a little bit tighter this afternoon on a chilly hillside in a place we happily call home. 



Wednesday, April 12, 2017

Uganda 2017


Bob Bledsoe just returned from another sucessfull hunt to East Africa. His have gun will travel professional hunter John Oosthuizen (hunters@huntersandguides.co.za) arranged this Safari in Uganda with Bruce Martin operator of Lake Albert Safaris and it would appear the pair put their best efforts forward once again.



Bob hit the ground running with his veteran 375 H&H Classic and his 300 H&H Legend. 



I have yet to hear all the details but as they say, a pic is still worth a thousand words. Well done guys !


Sunday, March 26, 2017

Stephen Grant's Best


The bulk of my stock duplication these days is almost solely devoted to double shotguns or rifles. Born in the houses of Purdey, Sauer, Watson or Boss to name a few with the vast majority being much older than I am. When one comes through my door for duplication the stock is beyond use for reasons of damage beyond repair or is being restocked to fit a new owner. In a classic case of modern recycling the old is being made new again.

Stock Maker Stephen Dalzell (stevemdalzell@gmail.com) recently sent in a typical butt stock that needed to be replaced. I became a participant by evil association. Very few of the stocks I machine are to be completely duplicated rather the head of the stock is cut and the butt is left in the block. A lot of time can be saved for the stock maker in machining the head if the head is in good enough condition to do so. Consequently the craftsman can devote more time to the shaping and finish work while still keeping the project within budget. A win, win situation for both the client and the craftsman.

The quality of the original walnut used to stock this Grant was excellent to say the least, real old world Pre War lumber. Made with Cast On for a cross threaded shooter and stocked in the old traditional manner I'm sure it gave the original owner a sense of confidence and pride when both were put to the test. I can only imagine the Red Grouse that may have careened across its muzzle traveling with a tail wind at just under mach 1.

Sadly at some point in changed hands and was subject to a less than expert butt extension which looked as out of place as an elephant in a canoe. It then fell victim to series of blows and abuse that eventually took a toll, it was now time for resurrection.

Mr. Dalzell expertly repaired and prepared the stock for duplication as I could clearly see it had been broken through the grip with all four horns cracked and now carefully glassed back into position. Not an easy exercise on a side lock where you have a small amount of wood and metal contact mated together seamlessly to keep the whole intact. Surprisingly the upper frame, trigger plate and lock work inletting was still clean and crisp, no apprentice ever put a chisel to this stock.

Stephen's instructions were simple "Cut as close as you dare, the center line lay-out is scribed, allow for Cast Off and do not machine beyond the end of the trigger plate". The wood supplied was as good as the original in every regard being both dense and hard with bold mineral marks, loud actually and it was not necessary to apply mineral spirits or alcohol to convince me this makeover was being done proper. The transplanted Scotsman in Maine was given good canvas.


I first degreased the face of the original stock as best as possible then screwed and epoxied a center onto the head of both the original and the replacement stock.


Then a block embossed with drive spur pattern was also screwed and epoxied to the end of the pattern butt stock and the drive spur pattern stamped into the stock to be cut. Care was taken to position each spur to allow for enough wood for cast off, drop and length as requested.


Care in operating the machine is now paramount as every job regardless of its pedigree is given the same amount of attention to detail.



For the next 4 hours I machined the stock closer and closer to its final dimensions by progressively  changing the size of the stylist for each individual cutter. Wood was selectively left in certain areas to allow for  the metal to be properly be fit by hand. From the rear of the tangs the replacement blank was left in the block to allow the stock maker to shape the stock as required to fit the new owner.






The final results will now hang on the skill of the stocker and a keen edge on his tools. I can only  hope this Grant will soon be in the hands of man that hunts Ruffs and Timber Doodle's with a cunning and determined Short Hair.


Sunday, February 12, 2017

Coming to a receiver near you


I have just returned from the SCI convention in Las Vegas. I met with some old clients and many old friends as well and met a few new clients. The dramatic change in temperatures from Cache Valley to Las Vegas was worth the trip alone. Campbell Smith brought his usual South African humor that kept everyone within ear shot rolling in laughter for hours. We did acquire a bottle of Blue Sapphire, some tonic and I seem to recall some limes that got flown in from Colorado. 



Tia Shoemaker picked up her 416 and then spent the rest of the convention trying to explain to everyone why it had head lights. With a 12.5" Length of pull and 8 pounds and an ounce or two fully loaded with 5 rounds you don't have to eject an empty to know its gone off. Together the pair should make a formidable force to deal with in a punch up as the lady is now packing some serious heat.





During the week I spent some time looking over what the optics companies have in store for us in 2017. There is noticeable trend a foot and I must admit I'm a bit puzzled by it. The number of Precision Rifle shooters in this country seems to be increasing every year. I think this is partially due to the lack of anyone being able to draw any tags in the west anymore and I'm told this shooting discipline is a lot of fun. The sport requires practiced skill and dedication and this has spawned a need for ever evolving kit with optics being front and center.

It would appear that we, the shooting public, have requested our rifles scopes to be Biggie Sized once again to allow for that currently fashionable 1138 yard shot onto the next ridge line, or over the county line or perhaps into the next time zone. To do so we now apparently "need" larger scope tube diameters to better fill this need. The new darlings of the game come with 34mm tubes but hang on folks a 36mm line is now plowing ground into the market as I type.  Allowing enough reticle movement in the come up turret to almost insure a hit on a target at the edge of your horizon. Be still my beating heart.  

You begged for bigger and the Industry has listened. All this is well and good for the practiced Long Range Shooter/Hunter but the trend I now see is the morphing over of these specialized optical marvels into a line of scopes now marketed as a "standard" hunting rifle scope. No, I'm not kidding, I wish I were. 

In one booth I was being shown such a scope and the Rep was doing his absolute level best with a straight face I might add to convince me his companies newest model, engineered around a 34mm tube was without any question the finest general purpose hunting scope on the market and would insure me precise shot placement from off the muzzle to beyond a 1000 yards. 

             I swirled the ice in my $18 G&T and asked him if he'd ever seen me shoot ? 

Confused by my question he pulled up short for a reply. I'm sure when he saw my eyes begin to glaze over that he decided to help out a more likely prospect that had just entered the booth. 

Look carefully at the 2 pictures below, seems far fetched doesn't it ? A 77mm, many pound Hubble sitting atop my daughters hunting rifle conjures up an image of a Buck Rogers taking on Martians that have over stepped their boundary. 


                                           No way you say, it will never happen!!

As the M-16 has evolved into what is now termed by many as the "Modern Hunting Rifle" so may a rifle scope such as in my mock up become a standard on many deer rifles in the future. Can you imagine the balance and dynamics of this sweet combo ? Gives me goose bumps just thinking about it.

I fully understand the internal space required to add an additional 1/2 mile come up to your turret column but are we beginning to not only loose sight of the forest through the trees or have we lost sight of the whole damn forest ? 

                                    Time will tell, anyone want to take some odds ? 

No 77mm Leica's were harmed during the filming of this picture


Sunday, January 8, 2017

2016 is over, and 2017 is a wide open gate

I'm not all that sure where all of 2016 went. Before I knew it all 365 days had clocked out. What was accomplished ?? Quite a lot thank you very much.




For one thing a long over due trip to visit McMillan Fiberglass can be logged in as a major plus. I flew to Phoenix to sort out some ideas with Team McMillan. I was given a solid day to plead my case, toss out some ideas and vent. They listened hard, express their own ideas and they vented while I listened in turn. We cut stocks, we altered a mold, we got shit done. I flew home at the end of the day a very happy camper. The results have begun to trickle in the door and the results are as anticipated. Jeff, Mike and Kelly many, many thanks.




On a sad note Dick Davis, part of the backbone at McMillan for all these years passed away. I for one will miss Dick and considered him a wealth of information and a good friend.

A Frogman washed up, Keith Wood stopped by to try some new skill sets, my 83 year old mother swanned in to stay and the annual float trip on the Teton was great as usual.



The work load in 2016 was diverse and very satisfying. A lot of rounds went down range and a lot of feed back came in from the field as the year progressed. I spent much of this year on R&D, mostly at night and over the weekends. I believe it was effort well spent and long over due. Central Valley Machine put up with my constant intrusions as usual and offered me a cot in early fall to save me from having to go home every night. Thanks Bret as always!





Now time will tell if the use of all that  midnight oil is going to bare fruit. If you don't evolve, you rust. Bathing in WD-40 can only help for so long.



A number of great projects were completed and there are some dandies in the works now. I have another Echols & Co. Lid in the works and should be ready to test drive soon. Artist and Illustrator Dan Burr is finishing up the Art Work for the Logo patch as I type this .


I need to send Kevin Dilley Kudos for his consistent photographic skills and ability to work with a mad man. Kev, you da man !!!!


Soon I'll be heading to the SCI convention and getting out of this ice box for a week. I'm sure I'll see a lot of old friends and clients hopefully make a few new ones.

And to think the Turkey season is just around the corner



                   In the words of Timbuc-3            The Futures So Bright I Gotta Wear Shades




See you all in Vegas




Thursday, December 1, 2016

You Just Never Know What Will Walk In The Door


I am occasionally asked to machine a set of grips for some rather ornate Handguns. A while ago I took the time to make a couple of additional fixtures to allow me a bit more versatility when called upon to do so. Making the fixtures took considerably more time to fabricate then to machine any actual pair of grip scales but the sweat equity was worth the up front investment. This pair of fixtures was used initially to machine a set of grips for a highly engraved Luger Parabellum. They allowed me to machine the raised inletting bosses on the underside of the Lugers grip panels for the 1st operation. Then allowed me to rotate the grip scales 180 degrees, index each scale back onto the fixture and then contour the exterior sides. On that particular project the scales exterior surface thickness was left  oversized to allow them to be carved per the clients request.

Recently another highly engraved Colt 1911 required a set of grips to be machined and the same fixture was pulled out of a drawer and dusted off. As the underside of the 1911 scales fit flush against the frame each scale was set up in the mill, machined smooth with an end mill then the screws holes were precisely located and drilled. Each scale was then rotated 180 degrees and each screw hole precisely relocated with gauge pins then counterbored for the screw heads. Low Head Allen screws were machined to mimic the original 1911 grip screws and then each scale was securely screwed to the fixture. Only then was the exterior profile and contour machined.



This 1911 had been expertly surface ground, detailed and polished by the Chad Tarbet and Brad Green at Intermountain Gunsmithing LLC. Once the metalwork was completed it was then completely engraved by Lee Griffiths. As Lee owns the 1911 he chose a World War 1 theme for the scenes. It is a damn shame I have no quality close ups of the scenes at this time as they are excellent.

This set of scales was machined from a very hard block of Turkish Walnut that Lee had squirreled away. It was thick enough for me to split in half to give the pair a "Book Match" look. I had considered using a block of Ebony in the same manner but the Turkish won the coin toss. The scales now finished have been left un-checkered to allow a prospective buyer the options of having them checkered, carved by Lee or remain as is.



Doug Turnbull's crew Carbonia Blued the majority of the finely polished parts after Lee had completed the engraving. The gold plating sets off a nice contrast with the French Grey, Carbonia blue and Walnut back drop. Then Intermountain was called to back into the game to refit and reassembled the 1911 without doing any cosmetic damage to the finished surfaces. I have it on good account that all the cell phones were turned off and Brad chose an Easy Listening radio station for the remainder of the assembly time.





The final result is eye catching to say the least and speaks volumes about the time and effort by bevy of craftsmen doing their best to achieve a desired goal.